0.192 in. ID 0.250 in. OD 1.540 in. Long Brass Spacer - AndyMark, Inc

$ 12.50

4.5 (256) In stock

This brass tube can be used in low load applications such as roller axles or as a spacer for a #10 screw. This tube is 1.54 inches long and has an outside diameter of 0.25 inches.

0.688 in. thick spacer used the in CIM-Sim gearbox. This spacer is used on the four corners to space the two plates of the gearbox.

0.192 in. ID 0.500 in. OD 0.688 in. Long Nylon Spacer

0.330 in. ID 0.470 in. OD 1.180 in. Long Nylon Spacer - AndyMark, Inc

0.222 in. ID 0.250 in. OD 0.335 in. Long Brass Spacer - AndyMark, Inc

0.313 in. ID 0.438 in. OD 0.438 in. Long Aluminum Spacer - AndyMark, Inc

Home - Mechanical - Hardware - Spacers - AndyMark, Inc

Spacers help keep things in place in a multitude of ways. You can use this to slip over a shaft that is smaller than the inside diameter, between

0.140 in. ID 0.250 in. OD 0.156 in. Long Nylon Spacer

0.375 in. ID 0.500 in. OD 0.375 in. Long Nylon Spacer - AndyMark, Inc

One great feature to brass is it's surface friction is quite low. We use these brass tubes as axles in some of our mecanum wheels.

0.192 in. ID 0.250 in. OD 2.140 in. Long Brass Spacer

Home - Mechanical - Hardware - Spacers - AndyMark, Inc

0.330 in. ID 0.470 in. OD 1.180 in. Long Nylon Spacer - AndyMark, Inc

0.500 in. ID 0.625 in. OD 0.570 in. Long Nylon Shoulder Spacer - AndyMark, Inc