35mm Race Solid Pinned Lifter (16.7mm pin) w/ WPC Low Friction - Techtonics Tuning

This lifter is used for converting hydraulic 16v heads to solid lifters without having to change hydraulic length valves. For 1.400" base circle cams start with 1.85mm lash cap for 1.500" base circle cams use 14.7mm lifter and start with a 3mm lash cap. Priced each WPC Low Friction Treatment is a micro shot peening

Only 10.5 grams. (std are 19 grams) These are for '93-'95 OBD1 ABA engines (and Mk1/Mk2 converted to 7mm). For 109 081S spring set & std dual springs.

Titanium Valve Spring Retainer 7mm Triple Groove 8v

A set of 8 lower spring seats used in the '75-'95 VW 4 cylinder engines. 16V engines need 2 sets.

Lower Spring Seats (set of 8) '75-'95

HD Polyacrylic Intake Seal 8mm

HD Valve Stem Seal Intake Polyacrylic 8mm (sold each)

A set of 8 valve stem seals for 8V heads with 8mm valve stems. (OEM)

Valve Stem Seals 8mm (OEM, set of 8)

8v Solid Lifter Parts - Techtonics Tuning

8v Solid Lifter Parts - Techtonics Tuning

Used for adjusting valve spring installed height. To be installed between the head and lower spring seats. Heat treated shims can be used with out

VSI 107 .030 Heat Treated Valve Spring Shim

Cylinder Heads & Parts - Techtonics Tuning

Valve Adjusting Shim, Sizes from 3.00mm-4.25mm - Techtonics Tuning

This lifter is used for converting hydraulic 16v heads to solid lifters without having to change from hydraulic length valves. For 1.500 base circle

35mm Race Solid Pinned Lifter (16.7mm pin) w/Diamond-like carbon

8v Race SPA Turbo - Techtonics Tuning

8v Race SPA Turbo - Techtonics Tuning

42mm Intake Valve for SPA Turbo X-Flow Cylinder Head

42mm Intake Valve for SPA Turbo Racing Head

12v VR6 Head Parts - Techtonics Tuning

Dhollandia - Products

Body Lift Kit ISUZU Bighorn, Trooper, Monterey

3 Point Scissor Lift

Roller Lifter Install - Solid Power From Hydraulic Roller Lifters

Full Body Solid Fabric Patient Lift Sling